- Frequently Bought Together
- The device has 2 functions: Hot Massage and Cool Massage, both with Sonic Vibration
- Hot Massage: 42°C - opens the pores and increases blood circulation to better absorb.
- Cool Massage: 6°C - cools the skin to lock in the skin care products
- Auto timing Cleanser
- 22,000 sonic vibrations per minute, for more effective cleaning and massaging with the silicone brush
- Add the powder puff to evenly apply liquid foundation for a natural & naked make-up
- Two optional working speeds.
- Both products recharge from the supplied USB connector
- Auto timing Features of the Ultrasonic Cleanser:
- Reduces puffiness and redness of skin.
- Great for headaches
- The massage head fits the curve on your face, making your skin care highly effective.
- Goes from 42 degrees to 6 degrees in 4 seconds!
- Auto-timing system, 2.5 minutes for each setting. How To Use the Skin Rejuvenator & Applicator:
22,000 sonic vibrations per minute, for more effective cleansing and rejuvenation.
Unlike rotating or spinning devices, ultrasonic cleaning works with skin’s natural elasticity. The sonic action loosens dirt and oil, removing pollutants and impurities from pores and priming skin to better absorb your skin care products.
Cleansing skin for 2 minutes with the cleansing brush allows for effective removal of make up and pollutants from skin
The make- up applicator pad, allows you to apply the liquid foundation evenly for a superior effect. This gives you natural and fresh looking make-up, all in 2 minutes.
How to use the Ultrasonic Cleanser:
Remove Eye Make Up by hand
Attach the cleansing brush to the device and wet it with water.
Apply the cleanser to your face. (Press the On/Off switch one time to start the low frequency vibration, press the switch twice for high frequency and press a third time to turn off the device.) Place the brush head against the area you wish to cleanse and move in a circular motion in each area of the face for approx. 30 seconds in each area. Avoid Eye area
NOTE – Keep the brush flush with skin. Pressing to hard could hinder the motion Remove excess cleanser from your face with a cloth and apply your skin cream to your face. Replace the brush head with the cotton pad if needed.
How to apply makeup using the Ultrasonic Cleanser:
Attach the make up applicator pad to the device and either apply some Liquid Foundation to it or apply some liquid foundation to your forehead, cheeks and chin
(Press the switch one time for low frequency vibration, which is good for fixing make-up and twice for high frequency, which is beneficial for make-up base. Press a third time to stop the device.) and massage in the direction of the skin texture.
Repeat the whole procedure for a superior effect. Rinse the make – up applicator with warm soapy water and dry when needed.
Features of the Skin Rejuvenvator & Applicator:
The unit has 2 functions: Hot massage and Cool massage, both with ultrasonic vibration, making the skin look smoother, tighter and more supple.
Warm massage and Ultrasonic Vibration: Operating at 42C it opens pores for deep cleansing and helps boost absorption skin care products. The ultrasonic vibration strengthens the effect of warm massage, improves circulation, revitalises the skin and gives a smooth glowing feel.
Cool massage and Ultrasonic Vibration : Operating at 6C it helps reduce puffiness around the eye area, shrinks the pores for even make application whilst brightening the skin texture.
To boost the absorption of skin care products to help hydrate and smooth the skin.
After cleaning your face, apply facial lotion and use the hot massage with ultrasonic vibration mode to allow for better absorption of the skin care products.
Press the on/Off switch for 3 seconds and the hot massage indicator light will Turn red. Press the On/Off switch a second time to shift to hot massage with ultrasonic vibration and the ultrasonic indicator light will turn yellow. Apply the skin rejuvenator to your face (including the areas around your eyes), move in a circular motion from inside to outside, bottom to top as the skin texture varies.
To use cool massage. After the skin care products have been fully absorbed, use the cool massage with ultrasonic vibration mode. This will help to shrink the pores ad tighten and smooth the skin, which is beneficial for applying make up products.
Press the On/Off switch a third time to shift to cool massage and the cool indicator light will turn blue. Press the On/Off switch a fourth time to shift to cool massage with ultrasonic vibration and the ultrasonic vibration indicator light will turn yellow.
Apply the skin rejuvenator to your face (including the areas around your eyes), move in a circular motion from inside to outside, bottom to top as the skin texture varies. Alternating hot and cool massage settings makes for smoother, brighter and more supple skin.
To turn off, press the On/Off switch for 3 seconds, or wait for the unit to turn off automatically after 2.5 minutes on each mode. A beeping sound will occur when the machine switches to different modes.
Clean the massage head and the main unit with a soft cloth after each use.
- Customer Reviews